This kit assembled by Children and painted as they desire.

Material: Craft Clothes Pins from Craft store and 1/8" masonite.

Make pattern from print of Butterfly by gluing to a piece of cardboard. Cut pattern to shape. Draw shape on masonite surface. (note: cutting is easier if you laminate 4 to 6 pieces using double faced tape).

Saw Butterfly wings from 1/8" masonite and sand edges to smooth.

Alter clothes pin to make body by sanding cone to ¾" dim.

Separate wings and sand to clean up rough or sharp edges.

Dry assemble body and wing and drill a 1/8" hole through as shown. Keep assembled as a pair.

Full Size Pattern