This is a simple cutout with a hole for hanging as a necklace.

Tools: Band Saw or Scroll saw, Sanders – disc and belt – and Drill Press.

Sand paper or emery boards.

Make pattern from print of Circle by gluing to a piece of cardboard.

Tape 4 to 6 layers of 1/8" to ¼" plywood together and attach pattern on top. Drill 1/8" hole for hanging and cut pattern and wood to shape using saw. Note: cutting four to six pieces at a time makes for smoother edges and speeds up production.

Sand outer surface with disc sander to smooth.

On next set of parts draw around pattern on wood surface and mark hole center.

Drill 1/8" hole.

Saw Shape. Sand shape.

Sand front and back surfaces with a belt sander to smooth and sand edges to remove roughness.

Full Size Pattern